Double Gang Uk Power & Usb Wall Plate
The Twin Power Socket with Dual USB Outlet allows you to charge / power 2 x USB devices and 2 other electrical items from one double gang wall plate.
The twin power socket with dual USB outlets allows you to charge / power 2 x USB devices and 2 other electrical items from one double gang wall plate.
The USB charging sockets are compatible with items with a USB connection such as, apple products (iPhone, iPod, iPad) and other smart phones, tablets and many other devices that require charging via a USB port.
The twin USB charging sockets have a total output of 2 amps (combined); if the current exceeds this it will automatically shut down to protect your device. The dual switched socket will fit any standard dual 25mm deep wall box.
This device must be installed by a competent person, in accordance with the current edition of the IET Wiring Regulations (BS7671) & Building Regulations.Please read these instructions carefully before commencing with an installation. Failure to install correctly will negate the product warranty.
Firstly, ensure you isolate the mains power supply and remove the fuse in the fuse box or switch off the circuit breaker in the consumer unit. Following the diagram over-leaf pass the cable through the entry holes and connect to the appropriate terminal.If an Earth loop connection is required, use the additional earth terminal block located in the backbox. Re-connect the mains supply when the installation is correctly completed. Before use, we recommend that a socket test is carried out. DO NOT MEGGER TEST – this will damage the USB charging circuit.
Double Gang USB Charge Wall Plate Features:
- Working voltage: 13A, 250V
- Working temperature -15 to 40 C
- USB Output: 2A, 5V
- UK 3 pin socket output: 13A, 250V
- Fits any standard back box (minimum depth of 25mm)
We recommend using a competent person for installation.Only suitable for indoor installations.Before carrying out any electrical work, isolate the mains power supply & refer to the fitting instructions.For safe installation & connection ensure that the earth is connected.Wire/wiring colours are in accordance with the current IET Wiring RegulationsBefore use we recommend that a socket test is carried out.