Speedy CAT6 plugs are designed to simplify twisted pair terminations by allowing the
wire pairs to be easily inserted through the plug and out of the front. This allows the installer to
easily check the wiring order before crimping the connector. Twist is maintained more easily
enabling a better performing crimp. Waste is minimised and the plugs are suitable for either
stranded or solid wires.

• Each plug allows twisted pair wires to be inserted through the body and pulled out of the
front to ensure the correct wiring order before crimping
• By pulling the cores into the plug, twists can easily be maintained up to the contacts,
enabling fully rated category performance
• Contact blades are suitable for stranded or solid wire cores from 24-26 AWG (0.51 –
0.40mm), with insulation up to 1.0mm O.D.
• Plugs available for both Category 5e and 6 twisted pair terminations
• Perfect solution for rapid termination
• Suitable for termination of solid or stranded UTP cables with sheath O.D. of 5.0 – 6.0mm
• Faults and failures minimised
• Simple one piece design
• Less cable scrap and wastage
• N.B. Must be used with suitable SPEEDY crimp tool - SKU 15-2006 or 15-2013

Specifications
• Housing material: Polycarbonate UL94V-0
• Gold plating: 1.27µm/50µ”
• 3 prong contact for solid or stranded cores
• Housing colour: transparent
• Operating temperature: -10˚C to 60˚C